Search
 
» » »

Wheel Bearings Denver CO

This page provides relevant content and local businesses that can help with your search for information on Wheel Bearings. You will find informative articles about Wheel Bearings, including "Tire Talk - Handling the Load Wheel Bearing Diagnosis". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Denver, CO that can help answer your questions about Wheel Bearings.
Roos Only - Subaru's Only
(303) 225-9456
3395 S Federal Blvd
Denver, CO
Fraser's Mobile Garage
(720) 763-8444
1535 Garland ST Unit 2
Lakewood, CO
Car Care Auto Service
(720) 884-9960
1575 Allison St
Denver, CO
Randy's Tire & Auto
(720) 249-5285
1059 W Littleton Blvd
Littleton, CO
Autotek Auto Repair
(720) 306-7751
7939 E Arapahoe Rd
Greenwood Village, CO
B's Auto Inc
(303) 578-4920
1236 E Hampden Ave
Englewood, CO
S & A Transmission
(303) 481-6406
2755 W Hampden Ave
Sheridan, CO
Arvada Auto Tech
(720) 763-8226
5395 Marshall St
Arvada, CO
DIA Auto Service
(720) 949-7883
7680 Pena Blvd
Denver, CO
Finn Mototech
(720) 315-7504
555 Alter St
Broomfield, CO
Provided By: 

Tire Talk - Handling the Load Wheel Bearing Diagnosis



8/1/2007



Although wheel bearings are often the most neglected part of the vehicle, they nevertheless have a critical job to do, and in most cases, do it very well. Not only are wheel bearings designed to support the weight of the vehicle and allow it to travel over a road with a minimum of rolling friction, the bearings must also withstand the thrust loads generated by high-speed cornering and hard acceleration and braking. In addition, most wheel bearings must operate in a hostile environment ranging from 40 F on a cold start-up to more than 400 F during heavy braking. Worse still, the muddy, silt-laden water of Americas southern flood plains have recently ruined thousands of wheel bearings by contaminating them with dirt and water.

Its All Ball Bearings Nowadays
Ball-type wheel bearings were very popular on early vehicles because they were easy to manufacture and install. Moreover, since ball-type wheel bearings have minimal load-bearing area between the ball and the inner and outer bearing races, their rolling friction is usually low. On the other hand, this lack of load-bearing area makes adjustment and lubrication critical because a combination of too much preload and incorrect bearing grease will cause rapid failure.

Rolling in the 50s
During the late 1950s, tapered roller wheel bearings became popular because the larger contact area between the roller and bearing races increased their load-bearing capacity and made them more reliable. The...

Click here to read the rest of the article from Tomorrow's Technician

Advertise   •   Contact Us   •   Subscribe   •   Article Index   •   Privacy Policy/Terms of Use
Tomorrow's Technician is a Babcox publication.
3550 Embassy Parkway, Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874