Search
 

Wheel Bearings Washington DC

This page provides relevant content and local businesses that can help with your search for information on Wheel Bearings. You will find informative articles about Wheel Bearings, including "Tire Talk - Handling the Load Wheel Bearing Diagnosis". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Washington, DC that can help answer your questions about Wheel Bearings.
AMMCO Marlow heights
(301) 909-5978
3501 Pohanka
Marlow heights, MD
AAMCO
(571) 482-8997
632 S. Pickett St.
Alexandria, VA
Preferred Automotive
(301) 836-1569
12356 Wilkins Avenue
Rockville, MD
County Transmissions Inc
(703) 345-9943
320 Dominion Rd NE
Vienna, VA
Certified Auto Repair, Inc.
(301) 364-4827
202 Park Rd
Rockville, MD
Fort Washington Auto Body and Repair
(301) 965-0646
6100 Livingston Road
Oxon Hill, MD
Beltway Auto Care Inc
(301) 909-5947
11844 Coakley Cir
Rockville, MD
Superior Auto Service
(301) 541-3990
12298 Wilkins Ave
Rockville, MD
Park Road Auto Svc
(301) 485-6899
202 Park Rd # B
Rockville, MD
Jacob's Autorama Inc.
(301) 202-2979
107 N Stonestreet Ave
Rockville, MD
Provided By: 

Tire Talk - Handling the Load Wheel Bearing Diagnosis



8/1/2007



Although wheel bearings are often the most neglected part of the vehicle, they nevertheless have a critical job to do, and in most cases, do it very well. Not only are wheel bearings designed to support the weight of the vehicle and allow it to travel over a road with a minimum of rolling friction, the bearings must also withstand the thrust loads generated by high-speed cornering and hard acceleration and braking. In addition, most wheel bearings must operate in a hostile environment ranging from 40 F on a cold start-up to more than 400 F during heavy braking. Worse still, the muddy, silt-laden water of Americas southern flood plains have recently ruined thousands of wheel bearings by contaminating them with dirt and water.

Its All Ball Bearings Nowadays
Ball-type wheel bearings were very popular on early vehicles because they were easy to manufacture and install. Moreover, since ball-type wheel bearings have minimal load-bearing area between the ball and the inner and outer bearing races, their rolling friction is usually low. On the other hand, this lack of load-bearing area makes adjustment and lubrication critical because a combination of too much preload and incorrect bearing grease will cause rapid failure.

Rolling in the 50s
During the late 1950s, tapered roller wheel bearings became popular because the larger contact area between the roller and bearing races increased their load-bearing capacity and made them more reliable. The...

Click here to read the rest of the article from Tomorrow's Technician

Advertise   •   Contact Us   •   Subscribe   •   Article Index   •   Privacy Policy/Terms of Use
Tomorrow's Technician is a Babcox publication.
3550 Embassy Parkway, Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874